3D Print Zip Up Hoodie, Retro Long Sleeve
The Splashis 3D print zip up hoodie opens all the way down the front, which is the practical difference between this and the pullover hoodies it sits next to — you can take it off without pulling a printed garment over your head, and you can wear it open as a layer. The fabric is polyester and the artwork is applied by 3D printing — ink laid straight onto the cloth, so the design carries photographic shading across the full body and sleeves instead of stopping at a chest panel. It is a regular fit with a hood and long sleeves, in a standard thickness built for fall and winter layering. Eleven print styles are available in sizes S through 5XL.
Key Features
- Full-length front zipper, so it opens completely and works as a layer
- Polyester fabric with 3D printing applied directly to the cloth
- Print covers the body and the sleeves, not just a chest panel
- Hood, in a regular fit through the chest and body
- Standard thickness, made for fall and winter layering
- Long sleeves in a regular, non-tapered cut
- Eleven print styles
- Eight sizes, S through 5XL
- Imported
How to Wear It
- Hold it against a zip hoodie you already wear — this one is a regular fit, not oversized.
- Wear it zipped over a plain tee with jeans for a weekend.
- Leave it open over a black tank and leggings for the gym run and the coffee after.
- In colder weather put it under a puffer or denim jacket; the standard thickness leaves room.
- Avoid a printed tee underneath worn open — the two patterns fight at the chest.
- Keep the rest of the outfit plain so the print stays the focus.
A full-zip hoodie with a print that runs the whole garment — eligible for 30-day returns under our return policy.
About This Product
The zipper is the design decision worth naming. A printed pullover has to be pulled over the head, which drags the printed face across itself every time; a full zip avoids that entirely and lets the hoodie work as an open layer in milder weather. Polyester is the other deliberate choice, and it follows from the printing: digital ink sits brightest and holds finest detail on a smooth synthetic surface, and polyester does not bleed that ink out over repeated washes the way cotton does. The fabric is a standard thickness rather than a heavy fleece, which keeps it usable from September through winter as a mid-layer. Two consequences worth knowing: close the zipper before washing, because an open zipper pull will catch and scar the printed face in the drum, and keep the dryer off high heat, since polyester distorts near heat before anything else fails.
Why You'll Like Wearing It
- Zips all the way down, so it goes on and off without disturbing the print
- Wearable open or closed, which doubles what it does in your wardrobe
- The print runs across the sleeves too, not just the front
- Polyester holds the printed color through repeated washing
- Eleven prints and eight sizes, S to 5XL
- Standard thickness layers under an outer coat
Who It's For
Best for:
- Everyday fall and winter wear, over a tee or a tank
- Casual weekends, errands and travel days
- Anyone who prefers a zip front to pulling a hoodie over their head
- Wearers who want a regular fit rather than an oversized one
- Eleven print styles in eight sizes, S through 5XL
What to look for in a 3d print zip up hoodie
Check the opening first. A full zip and a pullover behave very differently once the garment is printed: the zip version can be worn open, layered and removed without dragging the artwork over your head. Then look at how far the print runs — many graphic hoodies place a panel on the chest and leave the sleeves plain, while a printed one like this carries the design across the whole garment. Check the fiber too, because polyester holds digital ink and cotton gradually washes it pale. Finally, look at the stated thickness: a standard weight layers under a coat, a heavy fleece will not.
What to Pair It With
On a cool weekday you zip it over a plain white tee with straight jeans and sneakers, and nothing else in the outfit has to try. On a warmer evening you leave it open over a black tank, which turns the print into a jacket rather than a top. When it gets properly cold, a puffer or a denim jacket goes over it — the standard thickness means the shoulders still sit flat.
Care Instructions
Zip it closed before washing, so the pull cannot catch and scar the printed face. Machine wash cold, inside out, on a gentle cycle with similar colors. Keep it away from bleach and hot water, which are what actually fade a digital print. Tumble dry low or line dry in the shade; polyester softens and distorts near high heat, and the print shows that damage first. Steam it rather than ironing it, and if you must iron, use a cool setting on the reverse only.